Spring VOLKSWAGEN CRAFTER 2017 PRESENT SET Reinforced FRONT Springs + 25/30mm
Reference : ACRF198HV268
VOLKSWAGEN CRAFTER 4x2 - 4x4
(2017 - PRESENT+)
Complete kit reinforced front springs +25/30mm VOLKSWAGEN CRAFTER 2017-PRESENT:
This lifting kit from MAD Suspension Systems raises the car at the front by 25 to 30 mm, which increases ground clearance and gives the car a more pleasant appearance. The springs are progressive and become harder with higher loads. All MAD products are TUV approved and proven products that do not affect other parts of the car.
The lifting springs replace the car's original front suspension. They raise the car by approximately 25 to 30 mm, the exact lift for each car model appears in the product information. Suitable for those who wish to increase the car's ground clearance and achieve a nicer look. In addition, you get less body roll when turning and braking sharply.
Suitable for the following vans below:
- VW Crafter II 3.5T with chassis 2017+ Increases approximately 25-30 mm. Including 4 MOTION
- MAN TGE 2017+ Lifts approximately 25-30 mm. Including 4 MOTION
We recommend performing a front wheel alignment after installing this product, otherwise your tires will wear out laterally. Drive the car for 2-3 km before adjusting the front suspension so that the new suspension has time to settle.
- MAD's suspension system is there to compensate for different load weights and to support and assist the car's original spring system so that you maintain safety and comfort even at the maximum allowed load. Suspensions never increase the maximum allowed load weight for the car
We advise you to have these products installed by a professional
- Increased safety for you and your fellow road users!
- Better road holding at maximum load.
- Better driving comfort at maximum load.
- The car maintains its original height under maximum (allowed) load.
- The car's original suspension offers more working space at maximum load.
- All springs are progressive.
- All assembly is carried out without affecting the bodywork, so the product does not affect the car's warranties
- Assembly time approximately 1.5H per side plus front axle adjustment.
DELIVERY WITHIN 10-15 DAYS
