VOLKSWAGEN CADDY CADDY MAXI SPRING 2021 TODAY Reinforced Springs +30 +20 mm front rear +150 kgs
Reference : ACMD196HV351
VOLKSWAGEN CADDY / CADDY MAXI
(2021 - TODAY-)
VOLKSWAGEN CADDY CADDY MAXI SPRING 2021 TODAY Reinforced Springs +30 +20 mm front rear +150 kgs :
This complete MAD Suspension Systems lifting kit raises the car by 20 to 30 mm at the front and 15 to 20 mm at the rear, which increases ground clearance and gives the car a nicer look. The springs are progressive and become harder with higher loads. All MAD products are TUV approved and tested products that do not affect other parts of the car. By increasing the car's ground clearance, you can fit larger tires and rims and give the car better off-road driving. This kit is intended for those who always travel with more than 150 kg of load.
The front and rear lifting springs replace the car's original suspension. They raise the car by 20 to 30 mm at the front and 15 to 20 mm at the rear, the exact lift for each car model appears in the product information. Suitable for those who want to increase the car's ground clearance and get a nicer look as well as better off-road properties.
Compatible with the following car models:
- VW Caddy FWD incl. Maxi 2021+ Raises 20 mm at the front and 15 mm at the rear. Also suitable for the new 4-Motion
- VW Caddy 4-Motion 2021+ Raised 30 mm at the front and 20 mm at the rear
We recommend performing a front wheel alignment after installing this product, otherwise your tires will wear sideways. Drive the car 2 to 3 km before adjusting the front suspension.
MAD's suspension system is there to compensate for different load weights and to support and assist the car's original spring system so that you maintain safety and comfort even at the maximum permitted load. Suspensions never increase the maximum permitted load weight for the car.
- Increased safety for you and your fellow road users!
- Better road holding at maximum load.
- Better driving comfort at maximum load.
- The car maintains its original height under maximum (permitted) load.
- The car's original suspension offers more working space at maximum load.
- All springs are progressive.
- All assembly is carried out without affecting the bodywork, so the product does not affect the car's warranties
- Assembly time approximately 1H per front side and 1.5H at the rear plus front axle adjustment.
SHIPPING TIME WITHIN 12/15 DAYS
