SPRING VOLKSWAGEN CADDY 2004 2015 Heavy Duty Springs +25 +25 mm Front Rear 0-400 kgs
Reference : ACMD196HV251
VOLKSWAGEN CADDY
(2004 - 2015)
FRONT REAR SPRING SET +25 / +25 mm for VOLKSWAGEN CADDY 2004 2015:
Complete MAD kit including 2 front lift springs and 2 rear auxiliary springs for your Volkswagen Caddy 2004-2015. This lift kit raises the vehicle 25 mm at the front and 25 mm at the rear, increasing ground clearance and giving the vehicle a more aggressive stance. The springs are progressive and become stiffer under higher loads. All MAD products are TÜV-approved and tested and do not affect other parts of the vehicle. By increasing the vehicle's ground clearance, you can fit larger tires and wheels and give the vehicle better off-road performance.
The lift springs replace the vehicle's original front suspension, while the auxiliary springs work in conjunction with the vehicle's original rear suspension. They raise the vehicle 25 mm at the front and 25 mm at the rear. The exact lift height for each vehicle model can be found in the product information. Suitable for those wishing to increase the vehicle's ground clearance and achieve a more aggressive stance as well as improved off-road capability. This kit is recommended for those driving with varying loads up to 400 kg.
Compatible with the following vehicle models:
- Volkswagen Caddy and Maxi 2.0 SDi, 1.9 TDi, 2.0 TDi 2003-2015 (Except 4Motion)
We recommend performing a four-wheel alignment after installing this product, otherwise your tires will wear unevenly. Drive the vehicle 2 to 3 km before adjusting the front suspension.
The MAD suspension system is designed to compensate for varying load weights and to support and assist the vehicle's original spring system so that you maintain safety and comfort even at the maximum allowable load. The suspension components never increase the maximum allowable load rating of the vehicle.
- Increased safety for you and your fellow road users!
- Improved handling at maximum load.
- Improved ride comfort at maximum load.
- The vehicle maintains its original ride height under maximum (allowable) load.
- The vehicle's original suspension retains greater travel at maximum load.
- All springs are progressive rate.
- The entire assembly is fitted without affecting the bodywork, therefore the product does not void the vehicle's warranty.
- Installation time approximately 1 hour per front side and 1.5 hours at the rear, plus front wheel alignment adjustment.
SHIPPING LEAD TIME 12/15 DAYS
