• RESSORT TOYOTA RAV4 HYBRIDE 2020 AUJOURD'HUI  Ressorts Renforcés +40 +40 mm avant arriere
  • RESSORT TOYOTA RAV4 HYBRIDE 2020 AUJOURD'HUI  Ressorts Renforcés +40 +40 mm avant arriere - Access Auto 4x4
  • RESSORT TOYOTA RAV4 HYBRIDE 2020 AUJOURD'HUI  Ressorts Renforcés +40 +40 mm avant arriere - Access Auto 4x4

SPRING TOYOTA RAV4 HYBRID 2020 2025 Reinforced Springs +40 +40 mm front rear

Reference : ACMD364HV621


€729.50
Tax included

TOYOTA RAV4 Plug-in Hybrid

(2020 - 2025)

FRONT REAR SPRING SET +40 / +40mm for TOYOTA RAV4 HYBRID 2020 TODAY:

This lift kit raises the vehicle by 30 mm at the front and 30 mm at the rear, increasing ground clearance and giving the vehicle a more attractive look. The springs are progressive and become stiffer with higher loads. All MAD products are TUV approved and tested, ensuring they do not affect other parts of the vehicle. By increasing the vehicle's ground clearance, you can fit larger tires and wheels, providing better off-road handling.

The lift springs replace the vehicle's original suspension. They elevate the vehicle by 30 mm at the front and 30 mm at the rear. The exact lift for each vehicle model can be found in the product information. Suitable for those looking to increase the vehicle's ground clearance and achieve a more attractive appearance as well as better off-road capabilities.

Compatible with the following vehicle models:

  • Toyota RAV4 Plug-in Hybrid 2020+
  • Note: Suitable only for plug-in hybrids.

We recommend performing a four-wheel alignment after installing this product; otherwise, your tires may wear unevenly. Drive the vehicle for 2 to 3 km before adjusting the front suspension.

The MAD suspension system is designed to compensate for varying load weights and to support and assist the vehicle's original spring system, ensuring safety and comfort even at the maximum allowable load. The suspensions never increase the maximum allowable load for the vehicle.

BENEFITS:

  • Increased safety for you and your fellow road users!
  • Better road handling at maximum load.
  • Improved driving comfort at maximum load.
  • The vehicle maintains its original height under maximum load (allowed).
  • The vehicle's original suspension provides more working space at maximum load.
  • All springs are progressive.
  • The entire assembly is done without affecting the bodywork, so the product does not impact the vehicle's warranties.
  • Installation time is approximately 1 hour for the front and 1.5 hours for the rear, plus adjustment of the front axle.

SHIPPING TIME WITHIN 12/15 DAYS


Payment possible in 3 or 4 times without fees with ONEY

Loading...