SPRING TOYOTA RAV4 2005 2013 Reinforced Springs +30 +30 mm front rear
Reference : ACMD364HV521
TOYOTA RAV4 (petrol engines only)
(2005 - 2013)
FRONT REAR SPRING SET +30 / +30mm for TOYOTA RAV4 2005 2013:
This complete spring kit includes 2 front lift springs and 2 rear lift springs for your Toyota RAV4 2005-2013. This lift kit raises the car by 30 mm at the front and 30 mm at the rear, which increases ground clearance and gives the car a nicer look. The springs are progressive and become stiffer with higher loads. All MAD products are TUV approved and tested products that do not affect other parts of the car. By increasing the car's ground clearance, you can fit larger tires and rims and give the car better off-road driving.
The lift springs replace the car's original front and rear suspensions. They raise the car by 30 mm at the front and 30 mm at the rear. The exact lift for each car model can be found in the product information. Suitable for those who want to increase the car's ground clearance and get a nicer look as well as better off-road properties. This kit is recommended for those who drive with varied loads up to 500kg.
Compatible with the following car models:
- Toyota RAV4 2005-2013. Suitable for petrol engines only.
We recommend performing a four-wheel alignment after installing this product, otherwise your tires will wear out sideways. Drive the car 2 to 3 km before adjusting the front suspension.
MAD's suspension system is there to compensate for different load weights and to support and assist the car's original spring system so that you maintain safety and comfort even at the maximum permitted load. Suspensions never increase the maximum permitted load weight for the car.
Lift springs are designed for certain car models and are mainly used to increase the vehicle's ground clearance.
On most utility vehicles, you replace the car's original suspension with new springs, and on Pick-ups, the rear lift is usually associated with an auxiliary spring.
MAD lift kits are adapted to the car's original shock absorbers; no replacement is necessary.
The lift is always adjusted so as not to affect the car's chassis parts. Too much lift negatively affects the chassis.
ADVANTAGES:
- Increased safety for you and your fellow road users!
- Better handling at maximum load.
- Better driving comfort at maximum load.
- The car maintains its original height under maximum (permitted) load.
- The car's original suspension offers more working space at maximum load.
- All springs are progressive.
- All assembly is done without affecting the bodywork, so the product does not affect the car's warranties.
- Assembly time approximately 1H per front side and 1.5H at the rear plus front axle adjustment.
SHIPPING TIME WITHIN 12/15 DAYS
