SPRING TOYOTA LAND CRUISER 120 2003 2009 Reinforced Springs +35 +30 mm front rear
Reference : ACMD364HV511
TOYOTA LAND CRUISER 120
(2002 - 2009)
FRONT REAR SPRING SET +35 / +30mm for TOYOTA LAND CRUISER 120 2003 2009 :
This lift kit raises the vehicle by 35 mm at the front and 35 mm at the rear, increasing ground clearance and giving the vehicle a nicer look. The springs are progressive and become stiffer with higher loads. All MAD products are TUV approved and tested, ensuring they do not affect other parts of the vehicle. By increasing the vehicle's ground clearance, you can fit larger tires and wheels, providing better off-road handling.
The lift springs replace the original front and rear suspensions of the vehicle. They elevate the vehicle by 35 mm at the front and 35 mm at the rear. The exact lift for each vehicle model can be found in the product information. Suitable for those looking to increase the vehicle's ground clearance and achieve a nicer look as well as better off-road properties. This kit is recommended for those who drive with varying loads up to 500kg.
Compatible with the following vehicle models:
- Toyota Land Cruiser 120 Gasoline 4.0EFi-24V 4WD 2003-2008
- Toyota Land Cruiser 120 Turbo Diesel 3.0TD-16V 4WD 2003-2009
- Toyota Land Cruiser 120 Turbo Diesel 3.0D-4D-16V 4WD 2007-2009
- Toyota Land Cruiser 150 Gasoline 4.0VVTi-24V 4WD 2010-2013
- Toyota Land Cruiser 150 Turbo Diesel 3.0D-4D-16V 4WD 2011-2015
- Toyota Land Cruiser 150 Turbo Diesel 3.0D-4D-16V 4WD 2010-2012
- Toyota Land Cruiser 150 Turbo Diesel 2.8D-4D-16V 4WD 2015-2021
We recommend performing a four-wheel alignment after installing this product; otherwise, your tires will wear unevenly. Drive the vehicle for 2 to 3 km before adjusting the front suspension.
The MAD suspension system is designed to compensate for varying load weights and to support and assist the vehicle's original spring system, ensuring safety and comfort even at the maximum allowed load. The suspensions never increase the maximum allowed load for the vehicle.
ADVANTAGES :
- Increased safety for you and your fellow road users!
- Better handling at maximum load.
- Better driving comfort at maximum load.
- The vehicle maintains its original height under maximum (allowed) load.
- The vehicle's original suspension provides more working space at maximum load.
- All springs are progressive.
- The entire assembly is done without affecting the bodywork, so the product does not affect the vehicle's warranties.
- Installation time is approximately 1H per front side and 1.5H at the rear plus adjustment of the front axle.
EXPEDITION TIME WITHIN 12/15 DAYS
Delivery times
Réalisé à la commande sous 12-14 jours environ puis livraison sous 3/4 jours ouvrés
Recently viewed products
