SPRING TOYOTA LAND CRUISER 120 2003 2009 Heavy Duty Springs +35 +30 mm Front Rear

Reference : ACMD364HV511


€849.50
Tax included

TOYOTA LAND CRUISER 120

(2002 - 2009)

FRONT REAR SPRING SET +35 / +30mm for TOYOTA LAND CRUISER 120 2003 2009:

This lift kit raises the vehicle 35 mm at the front and 35 mm at the rear, increasing ground clearance and giving the vehicle a more aggressive look. The springs are progressive and become stiffer under higher loads. All MAD products are TÜV-approved and tested and do not affect other parts of the vehicle. By increasing the vehicle's ground clearance, you can fit larger tires and wheels and improve the vehicle's off-road performance.

The lift springs replace the vehicle's original front and rear suspension. They raise the vehicle 35 mm at the front and 35 mm at the rear. The exact lift height for each vehicle model can be found in the product information. Suitable for those wishing to increase the vehicle's ground clearance and achieve a more aggressive look as well as improved off-road capability. This kit is recommended for those who drive with varying loads up to 500 kg.

Compatible with the following vehicle models:

  • Toyota Land Cruiser 120 Petrol 4.0EFi-24V 4WD 2003-2008
  • Toyota Land Cruiser 120 Turbo Diesel 3.0TD-16V 4WD 2003-2009
  • Toyota Land Cruiser 120 Turbo Diesel 3.0D-4D-16V 4WD 2007-2009
  • Toyota Land Cruiser 150 Petrol 4.0VVTi-24V 4WD 2010-2013
  • Toyota Land Cruiser 150 Turbo Diesel 3.0D-4D-16V 4WD 2011-2015
  • Toyota Land Cruiser 150 Turbo Diesel 3.0D-4D-16V 4WD 2010-2012
  • Toyota Land Cruiser 150 Turbo Diesel 2.8D-4D-16V 4WD 2015-2021

We recommend performing a four-wheel alignment after installing this product, otherwise your tires will wear unevenly on the edges. Drive the vehicle 2 to 3 km before adjusting the front suspension.

 

The MAD suspension system is designed to compensate for varying load weights and to support and assist the vehicle's original spring system so that you maintain safety and comfort even at the maximum permitted load. The suspension never increases the maximum permitted load capacity of the vehicle.

BENEFITS:

  • Increased safety for you and your fellow road users!
  • Better road handling at maximum load.
  • Improved ride comfort at maximum load.
  • The vehicle maintains its original ride height under maximum (permitted) load.
  • The vehicle's original suspension provides more working travel at maximum load.
  • All springs are progressive rate.
  • The entire assembly is performed without affecting the bodywork, therefore the product does not void the vehicle's warranty.
  • Installation time approximately 1 hour per front side and 1.5 hours at the rear plus front wheel alignment.

SHIPPING WITHIN 12/15 DAYS


Payment possible in 3 or 4 times without fees with ONEY

Loading...