TOYOTA LAND CRUISER 120 2003 2009 Reinforced Springs +35 +30 mm front rear
Reference : ACMD364HV511
TOYOTA LAND CRUISER 150
(2009 - 2021)
FRONT REAR SPRING SET +35 / +30mm for TOYOTA LAND CRUISER 150 2009 2021 :
This lift kit raises the car by 35 mm at the front and 35 mm at the rear, which increases ground clearance and gives the car a nicer look. The springs are progressive and become harder with higher loads. All MAD products are TUV approved and tested products that do not affect other parts of the car. By increasing the car's ground clearance, you can fit larger tires and rims and give the car better off-road driving.
The lift springs replace the car's original front and rear suspensions. They raise the car by 35 mm at the front and 35 mm at the rear. The exact lift for each car model can be found in the product information. Suitable for those who want to increase the car's ground clearance and get a nicer look as well as better off-road properties. This kit is recommended for those who drive with varied loads up to 500kg.
Compatible with the following car models:
- Toyota Land Cruiser 120 Petrol 4.0EFi-24V 4WD 2003-2008
- Toyota Land Cruiser 120 Diesel Turbo 3.0TD-16V 4WD 2003-2009
- Toyota Land Cruiser 120 Diesel Turbo 3.0D-4D-16V 4WD 2007-2009
- Toyota Land Cruiser 150 Petrol 4.0VVTi-24V 4WD 2010-2013
- Toyota Land Cruiser 150 Diesel Turbo 3.0D-4D-16V 4WD 2011-2015
- Toyota Land Cruiser 150 Diesel Turbo 3.0D-4D-16V 4WD 2010-2012
- Toyota Land Cruiser 150 Diesel Turbo 2.8D-4D-16V 4WD 2015-2021
We recommend performing a four-wheel alignment after installing this product, otherwise your tires will wear out laterally. Drive the car 2 to 3 km before adjusting the front suspension.
MAD's suspension system is there to compensate for different load weights and to support and assist the car's original spring system so that you maintain safety and comfort even at the maximum permitted load. Suspensions never increase the maximum permitted load weight for the car.
ADVANTAGES :
- Increased safety for you and your fellow road users!
- Better road holding at maximum load.
- Better driving comfort at maximum load.
- The car maintains its original height under maximum (permitted) load.
- The car's original suspension offers more working space at maximum load.
- All springs are progressive.
- All assembly is carried out without affecting the bodywork, so the product does not affect the car's warranties.
- Assembly time approximately 1H per front side and 1.5H at the rear plus front axle adjustment.
SHIPPING TIME WITHIN 12/15 DAYS
Recently viewed products
Original Aluminum Rim Fiat 500X 2015-2022 5x110 18x7 ET40 REF 735668750
- Brand GENUINE PART ORIGINAL