TOYOTA HILUX SPRING 2016 2025 Reinforced Springs +35 +30 mm Front Rear
Reference : ACMD364HV591
TOYOTA HILUX
(2016 - 2021 - 2025)
FRONT REAR SPRING SET +35 / +30mm for TOYOTA HILUX 2016 TODAY:
Complete MAD kit including 2 front lift springs and 2 rear auxiliary springs for your Toyota Hilux 2016+. This lift kit raises the vehicle by 30 to 35 mm at the front and 25 to 30 mm at the rear, increasing ground clearance and giving the vehicle a more appealing look. The springs are progressive and become stiffer with higher loads. All MAD products are TUV approved and tested, ensuring they do not affect other parts of the vehicle. By increasing the vehicle's ground clearance, you can fit larger tires and wheels, providing better off-road handling.
The lift springs replace the vehicle's original front suspension, while the auxiliary springs work with the vehicle's original rear suspension. They raise the vehicle by 30 to 35 mm at the front and 25 to 30 mm at the rear, with the exact lift for each vehicle model detailed in the product information. Suitable for those looking to increase the vehicle's ground clearance and achieve a more attractive appearance as well as improved off-road capabilities. This kit is recommended for those who drive with varying loads up to 500kg.
Compatible with the following vehicle models:
- Toyota Hilux 4WD 2016+ Raises the vehicle by 30 to 35 mm at the front and 25 to 30 mm at the rear.
We recommend performing a four-wheel alignment after installing this product; otherwise, your tires may wear unevenly. Drive the vehicle for 2 to 3 km before adjusting the front suspension.
The MAD suspension system is designed to compensate for varying load weights and to support and assist the vehicle's original spring system, ensuring you maintain safety and comfort even at the maximum allowable load. The suspensions never increase the maximum allowable load for the vehicle.
BENEFITS:
- Increased safety for you and your fellow road users!
- Better handling at maximum load.
- Improved driving comfort at maximum load.
- The vehicle maintains its original height under maximum load (allowed).
- The vehicle's original suspension provides more working space at maximum load.
- All springs are progressive.
- The entire assembly is done without affecting the bodywork, so the product does not impact the vehicle's warranties.
- Installation time is approximately 1 hour per front side and 1.5 hours at the rear plus adjustment of the front axle.
SHIPPING TIME WITHIN 12/15 DAYS
