Spring MERCEDES SPRINTER 2006 2016 FRONT Reinforced Springs Set + 25mm
Reference : ACRF098HV133
MEREDES SPRINTER 3.5 T
(2006 - 2016)
Complete front reinforced springs kit +25mm MERCEDES SPRINTER 2006-2016:
Complete MAD kit with 2 lifting springs / Reinforcement springs suitable for your Volkswagen Crafter / Mercedes Sprinter 3.5T. This lifting kit raises the vehicle by 25 mm, which increases ground clearance and gives the vehicle a more attractive look. The springs are progressive and become stiffer with higher loads. All MAD products are TUV approved and tested products that do not affect other parts of the vehicle.
The lifting springs replace the vehicle's original suspension. They raise the vehicle at the front by approximately 25 mm, the exact lift for each vehicle model can be found in the product information. Suitable for those who wish to increase the vehicle's ground clearance and achieve a more attractive look.
This kit requires the purchase of our 15mm spacer.
-
Suitable for the following vans:
- Mercedes Sprinter 3.5T with. The chassis 2006-2017 raises approximately 35 mm
- VW Crafter 3.5T with. Chassis 2006-2016 raises approximately 35 mm.
We recommend performing a front wheel alignment after installing this product, otherwise your tires will wear unevenly. Drive the vehicle for 2-3 km before adjusting the front suspension so that the new suspension has time to settle.
The MAD suspension system is designed to compensate for different load weights and to support and assist the vehicle's original spring system so that you maintain safety and comfort even at the maximum allowed load. The suspensions never increase the maximum allowed load weight for the vehicle.
ADVANTAGES:
- Increased safety for you and your fellow road users!
- Better handling at maximum load.
- Better driving comfort at maximum load.
- The vehicle retains its original height under maximum (allowed) load.
- The vehicle's original suspension provides more working space at maximum load.
- All springs are progressive.
- The entire assembly is done without affecting the bodywork, so the product does not affect the vehicle's warranties.
- Installation time approximately 1H per side plus adjustment of the front axle.
- Package dimensions: 42 x 38 x 22.
- Weight: 11 kg
DELIVERY WITHIN 10-15 DAYS
