MERCEDES SPRINTER 2006 2016 SET Reinforced FRONT Springs + 35mm
Reference : ACRF098HV133
MERCEDES SPRINTER 3.5 T
(2006 - 2016)
Complete kit of reinforced front springs +35mm MERCEDES SPRINTER 2006-2016:
Complete MAD kit with 2 lifting springs / reinforcement springs adapted to your Volkswagen Crafter / Mercedes Sprinter 3.5T. This lifting kit raises the car by 35 mm, which increases ground clearance and gives the car a nicer look. The springs are progressive and become harder with higher loads. All MAD products are TUV approved and tested products that do not affect other parts of the car.
The lifting springs replace the car's original suspension. They raise the car to the front by approximately 20 mm, the exact lift for each car model can be found in the product information. Suitable for those who wish to increase the car's ground clearance and get a nicer look.
This kit requires the purchase of our 15mm spacer.
-
Suitable for the following vans:
- Mercedes Sprinter 3.5T with. The 2006-2017 chassis raises approximately 35 mm
- VW Crafter 3.5T with. 2006-2016 chassis raises approximately 35 mm.
We recommend performing a front wheel alignment after installing this product, otherwise your tires will wear out sideways. Drive the car for 2-3 km before adjusting the front suspension so that the new suspension has time to settle.
The MAD suspension system is there to compensate for different load weights and to support and assist the car's original spring system so that you maintain safety and comfort even at the maximum allowed load. Suspensions never increase the maximum allowed load weight for the car.
ADVANTAGES:
- Increased safety for you and your fellow road users!
- Better road holding at maximum load.
- Better driving comfort at maximum load.
- The car maintains its original height under maximum (allowed) load.
- The car's original suspension offers more working space at maximum load.
- All springs are progressive.
- All assembly is done without affecting the bodywork, so the product does not affect the car's warranties
- Assembly time approximately 1H per side plus front axle adjustment.
- Package dimensions: 42 x 38 x 22.
- Weight: 11 kg
DELIVERY WITHIN 10-15 DAYS
