Spring FIAT DOBLO 2010 2019 SET Reinforced FRONT Springs + 20/25mm
Reference : ACRF051HV838
FIAT DOBLO
(2010 - 2019)
Complete kit of reinforced front springs +20/25mm FIAT DOBLO 2010-2019:
Complete MAD kit with 2 lift springs / reinforcement springs for your Fiat Doblo, Opel Combo 2010+. This lift kit raises the front of the car by 20 to 25 mm, which increases ground clearance and gives the car a more pleasing appearance. The springs are progressive and become stiffer with higher loads. All MAD products are TUV approved and well-tested products that do not affect other parts of the car. By raising the car, you travel more safely and better on bad roads and off-road.
Lift springs replace the car's original front suspension. They raise the front of the car by approximately 20 to 25 mm, the exact lift for each car model appears in the product information. MAD is a certified premium partner of Volkswagen for commercial vehicles.
Perfect for those who take you into the woods and fields, and which gives the car better stability when driving with a heavy load.
All MAD suspension systems have undergone extensive checks and received approval from the German TÜV. TÜV is known for its strict product approval requirements, which has made it one of the most important quality labels internationally.
TÜV has also carried out further tests on how MAD springs affect the braking effect and ESP in cars. The R13 test carried out proves that our springs have no negative impact on the brakes and ESP of cars. This test result will now be included in all new MAD suspension kits, but this does not mean that previous kits do not have this approval.
All MAD suspension kits are supplied with installation instructions in English, which further enhances ease of use and makes it easier for customers to install the product correctly.
Compatible with the following car models:
- Fiat Doblo 2010-2019
- Opel Combo 2012-2018
We recommend performing a front wheel alignment after installing this product, otherwise your tires will wear out laterally. Drive 2 to 3 km before performing a front suspension adjustment.
Load springs replace the car's main suspension. Most load springs are progressively wound to slightly adjust their stiffness depending on the load they receive. This means that you generally drive as comfortably with as without load (does not apply to HD kits).
Most load springs lift the car by approximately 1 to 3 cm in the unloaded position.
Lift kit/Reinforced front spring. These raise the front of the car by approximately 2 to 3 cm, unless otherwise specified in the catalog notes.
ADVANTAGES:
- Increased safety for you and your fellow road users!
- Better handling at maximum (permitted) load
- Better driving comfort at maximum (permitted) load
- The car maintains its original height under maximum (permitted) load, which provides better steering capability in corners and during rapid maneuvers.
- The car's original suspension and shock absorbers offer more working space at maximum (permitted) load
- With nearly 50 years of experience in special suspensions, we have extensive knowledge of what is required for each car model.
- Since most products are TÜV approved, you can always count on the highest quality and that all springs are adapted to the relevant car model, nothing is universal.
- All assembly is carried out without affecting the bodywork, so the product does not affect the car's warranties
- Assembly time approximately 1.5H per side plus front wheel alignment.
DELIVERY WITHIN 10-15 DAYS
Recently viewed products
Roof Bars PEUGEOT BIPPER 2008 TODAY LONGITUDINAL + TRANSVERSAL POLISHED
- Roof bar type LONGITUDINAL
