• Ressort PEUGEOT BOXER 2002 2006 SET Ressorts AVANT Renforcés + 35mm
  • Ressort PEUGEOT BOXER 2002 2006 SET Ressorts AVANT Renforcés + 35mm - Access Auto 4x4

Spring PEUGEOT BOXER 2002 2006 SET Reinforced FRONT Springs + 35mm

Reference : ACRF058HV158

€679.00
Tax included

PEUGEOT BOXER

(2002 - 2006)

Complete kit reinforced front springs +35mm PEUGEOT BOXER 2002-2006:

Complete set of 2 lifting springs / reinforcement springs suitable for your Jumper, Ducato and Boxer. This lifting kit raises the car by 35 mm, which increases ground clearance and gives the car a nicer look. The springs are progressive and become harder with higher loads. All MAD products are TUV approved and tested products that do not affect other parts of the car.

The lifting springs replace the car's original suspension. They raise the front of the car by 35 mm; the exact lift for each car model appears in the product information. Suitable for those who want to increase the car's ground clearance and get a nicer look.

Compatible with the following car models:

  • Citroen Jumper 30,33 & 35 2002-2006
  • Fiat Ducato 30, 33, 35 and 40 2002-2006
  • Peugeot Boxer 3.0T, 3.3T & 3.5T 2002-2006

We recommend performing a front wheel alignment after installing this product, otherwise your tires will wear out sideways. Drive 2 to 3 km before proceeding with a front suspension adjustment.

MAD's suspension system is there to compensate for different load weights and to support and assist the car's original spring system so that you maintain safety and comfort even at the maximum permitted load. Suspensions never increase the maximum permitted load weight for the car.

ADVANTAGES:

  • Increased safety for you and your fellow road users!
  • Better road holding at maximum (permitted) load
  • Better driving comfort at maximum (permitted) load
  • The car maintains its original height under maximum (permitted) load, which provides better steering capability in corners and during rapid maneuvers.
  • The car's original suspension and shock absorbers offer more working space at maximum (permitted) load
  • With nearly 50 years of experience in special suspensions, we have extensive knowledge of what is required for each car model.
  • Since most products are TÜV approved, you can always count on the highest quality and the fact that all springs are adapted to the specific car model, nothing is universal.
  • All assembly is carried out without affecting the bodywork, so the product does not affect car warranties
  • Assembly time approximately 1.5H per side plus front axle adjustment.

DELIVERY WITHIN 10-15 DAYS

Payment possible in 3 or 4 times without fees with ONEY

Recently viewed products