MITSUBISHI L200 SPRING KIT 2015 2024 Reinforced Springs +30 +25 mm front rear
Reference : ACMD104HV401
MITSUBISHI L200
(2015 - 2024)
FRONT REAR SPRING SET +30 / +25 mm for MITSUBISHI L200 2015 2024:
Complete MAD kit with 2 front lift springs and 2 rear auxiliary springs for your Fiat Fullback / Mitsubishi L200. This lift kit raises the car by 30 mm at the front and 25 mm at the rear, which increases ground clearance and gives the car a nicer look. The springs are progressive and become harder with higher loads. All MAD products are TUV approved and tested products that do not affect other parts of the car. By increasing the car's ground clearance, you can fit larger tires and rims and give the car better off-road handling.
The lift springs replace the car's original front suspension, while the auxiliary springs work with the car's original rear suspension. They raise the car by 30 mm at the front and 25 mm at the rear; the exact lift for each car model appears in the product information. Suitable for those who want to increase the car's ground clearance and get a nicer look as well as better off-road properties. This kit is recommended for those who drive with varied loads up to 500kg.
Compatible with the following car models:
- Fiat Fullback 4WD 2016+
- Mitsubishi L200 4WD 2015+
We recommend performing a four-wheel alignment after installing this product, otherwise your tires will wear out sideways. Drive the car 2 to 3 km before adjusting the front suspension.
MAD's suspension system is there to compensate for different load weights and to support and assist the car's original spring system so that you maintain safety and comfort even at the maximum permitted load. Suspensions never increase the maximum permitted load weight for the car.
ADVANTAGES:
- Increased safety for you and your fellow road users!
- Better road holding at maximum load.
- Better driving comfort at maximum load.
- The car maintains its original height under maximum (permitted) load.
- The car's original suspension offers more working space at maximum load.
- All springs are progressive.
- All assembly is done without affecting the bodywork, so the product does not affect the car's warranties.
- Mounting time approximately 1H per front side and 1.5H at the rear plus front axle adjustment.
SHIPPING TIME WITHIN 12/15 DAYS
Recently viewed products
original front bumper Fiat Doblo 2015-2023 Black REF 735615286
- Brand PRASCO
-
Original reference (OEM)
167373471T
CI3311011