MERCEDES VITO W447 SPRING 2014 TO PRESENT Reinforced Springs +20/25 mm rear 150kgs+
Reference : ACMD098HV088
MERCEDES VITO / CLASS VW447
(2014 - PRESENT)
MERCEDES VITO W447 2014 TO PRESENT Reinforced Springs +20/25 mm rear 150kgs+ :
Complete set of 2 constant load/lifting springs rated for 150 kg and above for Vito/Class V 2014+ and EQV 2021+.
Complete kit of 2 rear lift springs for your Vito/Class V (from 2014). This kit raises the rear of the vehicle by 20 to 25 mm, improving ground clearance and aesthetics. The springs are progressive, and their stiffness increases with load. All MAD products are TÜV approved and tested; they do not affect other vehicle components. This kit is ideal for drivers regularly carrying loads exceeding 150 kg.
The load/lift springs replace the vehicle's original suspension. They raise the rear of the car by approximately 20 to 25 mm; the exact height for each model is specified in the product sheet. They are suitable for those looking to increase their vehicle's ground clearance, improve its aesthetics, and enhance stability when loaded. At the maximum permitted load, the vehicle height remains the same as the original.
Compatible with the following car models:
- Mercedes Vito front-wheel drive and Class V front-wheel drive (from 2014)
- Mercedes Vito RWD and Class V RWD 2014+ (Not suitable for factory lifted 4x4 models)
- Mercedes-Benz EQV 2021+
The MAD suspension system is designed to compensate for load variations and to support and assist the vehicle's original suspension system, ensuring safety and comfort even at the maximum permitted load. The suspensions never exceed the vehicle's maximum permitted load.
ADVANTAGES:
- Increased safety for you and other road users!
- Better handling at maximum load.
- Improved driving comfort at maximum load.
- The vehicle retains its original height at maximum (permitted) load.
- The original suspension of the vehicle has greater leeway at maximum load.
- All springs are progressive.
- The assembly is done entirely without damaging the bodywork, so the product does not affect the vehicle's warranties.
- Installation time: approximately 1.5 hours
SHIPPING TIME WITHIN 12/15 DAYS
All images are universal for the respective mounting system. The appearance of the springs, bellows, and supports may slightly differ from the images shown, but they will always fit the vehicle for which the kit is designed.
