• MERCEDES VITO W447 2014 TO PRESENT Reinforced Springs
  • MERCEDES VITO W447 2014 TO PRESENT Reinforced Springs

MERCEDES VITO W447 2014 TO PRESENT Reinforced Springs +15/20 mm rear 0 - Maximum kgs

Reference : ACMD098HV078

€449.00
Tax included

MERCEDES VITO W447

(2014 - TO PRESENT)

MERCEDES VITO W447 2014 TO PRESENT Reinforced Springs +15/20 mm rear 0 - Maximum kgs :

Complete kit of 2 rear load springs / lift springs for Mercedes-Benz Vito / Class V (from 2014) and EQV (from 2021). This lift system raises the rear of the vehicle by 15 to 20 mm, improving ground clearance and aesthetics. The springs are progressive, and their stiffness increases with the load. All MAD products are TÜV approved and tested; they do not affect other vehicle parts or warranties. This kit is ideal for use with variable loads, from 0 to the maximum permitted load. At maximum load, the vehicle maintains its original height. Installing MAD progressive rear load springs preserves driving comfort even when unloaded.

The lift springs replace the vehicle's original suspension. They raise the rear of the car by approximately 15 to 20 mm; the exact height for each model is indicated in the product sheet. They are suitable for those who wish to increase their vehicle's ground clearance, enhance its aesthetics, and improve stability when loaded.

Compatible with the following car models:

  • Mercedes Vito front-wheel drive and Class V front-wheel drive (from 2014)
  • Mercedes Vito RWD and Class V RWD 2014+ (Not suitable for factory lifted 4x4 models)
  • Mercedes-Benz EQV 2021+

The MAD suspension system is designed to compensate for load variations and to support and assist the vehicle's original suspension system, ensuring safety and comfort even at the maximum permitted load. The suspensions never exceed the vehicle's maximum permitted load.

ADVANTAGES:

  • Increased safety for you and other road users!
  • MAD has over 50 years of experience in the suspension field.
  • TÜV approved products mean superior quality and ensure that all springs are suitable for each car model; nothing is universal.
  • Better road handling at maximum (permitted) load.
  • Improved driving comfort at maximum (permitted) load.
  • The car maintains its original height at maximum (permitted) load.
  • The car's original suspension has greater leeway at maximum load.
  • All springs are progressive.
  • The assembly is done entirely without damaging the bodywork, so the product does not affect the vehicle's warranties.
  • Installation time: approximately 1.5 hours
  • Kit weight: 7.1 kg

SHIPPING TIME WITHIN 12/15 DAYS

All images are universal for the respective mounting system. The appearance of the springs, bellows, and supports may slightly differ from the images shown, but they will always fit the vehicle for which the kit is designed.

Payment possible in 3 or 4 times without fees with ONEY

Recently viewed products