Rear Air Suspension KIT for MAXUS EDELIVER 9 2020 TODAY with Specific Panel Compressor
Reference : ACNR267CS014C
MAXUS EDELIVER 9
(2020 - TODAY-)
Rear Air Suspension KIT for MAXUS EDELIVER 9
with Specific Panel Compressor :
-
MAD air suspension is in most cases designed to work with the car's original rear suspension. Air suspension is available in different variants and is suitable for the car owner who wants to be able to adjust the hardness of their suspension themselves. Air suspension is available for manual filling as you must have access to air to fill the bellows to the desired pressure. It is also available with a compressor and pressure gauge so you can adjust the desired pressure yourself, even while driving. There is also a full air suspension that compensates for the car's original suspension and automatically adjusts the load level. By installing air suspension on your car, you get a completely different driving experience, whether you are driving loaded or unloaded. All air suspensions are model-specific to match your particular car model. With air suspension, you can also adjust the height of the rear of your vehicle on specific occasions if you need higher ground clearance. Comfort and safety reach a whole new level with MAD air suspension. This particular air suspension is incredibly good if you own an "ice plate" camper or a motorhome for which you want the best air suspension on the market. Campers are already heavily built from the start and need to reinforce their rear suspension. An ice plate or mobile home will be much better with MAD air bellows at the rear.
Compatible with the following car models:
- Maxus eDeliver9 2020+
You get the best results if the air bellows are mounted with a compressor. You can then partly adjust the air pressure in your bellows by simply pressing a button located inside the car's cabin, but you also avoid the risk of destroying the bellows with too high or too low pressure in them because you are constantly aware of the pressure you have.
Air suspension has the advantage of being able to have different hardness in the right and left bellows, which can be a big advantage if, for example, you have more load on one side of your vehicle. Air suspension also generally supports heavier loads than a steel spring, but it should be noted that an air spring does not feel good under constant and heavy load, so in these cases, e.g. a robust steel spring would be preferable.
- Minimum pressure in empty air bellows 0.5 BAR
- Minimum and maximum pressure under load 1.0 - 3.0 BAR
- Reduced tire wear
- The best air bellows on the market
- Does not affect car warranties
- Reduced sensitivity to crosswinds
- All MAD products are TUV approved
- Better quality and fit
- All kits are available with and without compressor
- Hardware warranty 2 years without compressor
- Hardware warranty 3 years with compressor (Electronics 1 year)
SHIPPING TIME 1 - 2 WEEKS
MAD's suspension system is there to compensate for different load weights and to support and assist the car's original spring system so that you maintain safety and comfort even at the maximum authorized load. Suspensions never increase the maximum authorized load weight for the car.
All images are universal for the respective mounting system. The appearance of the bellows and brackets may differ somewhat from the available images, but they always correspond to the intended car kit.
