• Rear Air Suspension Kit for CITROEN JUMPER 2006+
  • Rear Air Suspension Kit for CITROEN JUMPER 2006+
  • Rear Air Suspension Kit for CITROEN JUMPER 2006+

Rear Air Suspension Kit for CITROEN JUMPER 2006+ with Specific Compressor and Gauges

Reference : ACFBM137HV544CS


€1,195.00
Tax included

Rear Air Suspension Kit for Toyota Proace Max 2024+ SmartAir with Specific Compressor and Gauges:

MAD air suspension with compressor for Jumper / Ducato / Boxer / Campervan / Van, ideal for those who want to adjust the firmness of their suspension themselves

Front-wheel drive, incl. chassis-cab, dashboard control panel, left-hand drive, not compatible with electronic handbrake

The MAD air suspension, suitable for Fiat Ducato, Citroën Jumper, and Peugeot Boxer (from 2006), is generally designed to work in conjunction with the original leaf spring rear suspension (semi-air suspension). Available in different versions, it is suitable for drivers who wish to adjust the firmness of their suspension themselves. Inflation can be manual (requiring access to compressed air to inflate the bellows to the desired pressure) or with a compressor and gauge (allowing adjustment while driving). Finally, a full air suspension automatically compensates for the original suspension and adjusts the load level.

Installing an air suspension on your vehicle offers a completely different driving experience, whether your vehicle is loaded or not. Each air suspension is specifically designed to fit your car model. With air suspension, you can also adjust the height of the rear of your vehicle in certain situations, for example, to increase ground clearance. With MAD air suspension, comfort and safety reach a whole new level. Raising the rear height can be useful, for example, for boarding or disembarking on a ferry, parking your camper van, or crossing a significant speed bump.

This air suspension kit with compressor and gauge performs particularly well if you own a folding caravan or a motorhome and are looking for the best air suspension on the market. Motorhomes are already robust and require reinforcement of their rear suspension. With MAD rear air bellows, your folding caravan or motorhome will benefit from significantly improved driving comfort.

This kit includes a bi-directional compressor and a gauge, as illustrated. The model-specific control panel attaches to the left of the steering wheel. You can easily and separately adjust the left and right bellows, even while driving, and release air from the bellows with a simple press of a button if necessary.

With a model-specific control panel!

Compatible with the following car models below:

  • Citroën Jumper 30, 33 & 35 2006+
  • Fiat Ducato 30, 33, 35 and 40 2006+
  • Peugeot Boxer 3.0T, 3.3T, 3.5T & 4.0T 2006+
  • Opel Movano 2022+
  • Toyota Proace Max 2024+ (new generation)

  • For optimal results, install the air bellows with a compressor. This way, you can adjust the air pressure of the bellows with a simple press of a button in the cabin, while avoiding damaging the bellows due to too high or too low pressure.

    The air suspension has the advantage of allowing different firmness for the left and right bellows, which can be very useful if, for example, the load is heavier on one side of the vehicle. It generally supports heavier loads than a steel spring suspension, but it should be noted that an air suspension can be uncomfortable under a significant and constant load; in this case, a reinforced steel spring may be preferable.

Product Specifications:

  • Minimum pressure in unloaded air bellows: 0.5 bar
  • Minimum and maximum pressure under load: 1.0 to 3.0 bar (6.0 bar temporarily).
  • Your tires will wear less.
  • The best air bellows on the market
  • Does not affect vehicle warranties.
  • Easy to install
  • Reduced sensitivity to crosswinds
  • All MAD products are TÜV approved and certified by the inspection body.
  • Best quality and best fit
  • All kits are available with and without compressor.
  • 2-year warranty on materials (excluding compressor)
  • 3-year warranty on materials with compressor (electronics: 1 year)

Delivered with TÜV Certificate

The MAD suspension system is designed to compensate for load variations and to support and assist the vehicle's original suspension system, ensuring safety and comfort even at the maximum authorized load. The suspensions never exceed the vehicle's maximum authorized load.

DELIVERY WITHIN 10/15 DAYS


Payment possible in 3 or 4 times without fees with ONEY

Loading...