KIA PV5 Chassis Cab Spring Kit 2025 TODAY REINFORCED Rear Spring Set
Reference : ACRF378HV048
KIA PV5 Chassis Cab
(2025 - TODAY+)
Maximum load capacity, chassis cab, minimum load per axle: 1060 kg
KIA PV5 Chassis Cab Spring Kit 2025 TODAY REINFORCED Rear Spring Set:
Complete set of 2 variable load springs (0 to maximum permissible load). Compatible with KIA PV5 electric (from 2025).
Does your KIA PV5 sag at the rear when loaded with tools or accessories? MAD Suspension, a recognized specialist, offers the ideal solution. By replacing your original rear springs with our MAD reinforced load springs, you can load your vehicle without the risk of sagging. The photo shows the vehicle loaded to 500 kg, perfectly illustrating the before/after difference.
The springs are progressive, and their stiffness increases with the load. All MAD products are TÜV approved and tested; they do not affect other vehicle components. This kit is suitable for drivers whose load varies from 0 to the maximum permissible load. At maximum permissible load, the vehicle maintains its original ride height.
These load springs replace the vehicle's original rear springs. They raise the rear of the vehicle by approximately 40 mm when unloaded. They are particularly suitable for vehicles equipped with additional equipment that increases their KIA PV5 weight.
Compatible with the following car models:
- KIA PV5 electric 2025+
-
KiaPV5 Cargo VAN (2025)51.5 kWh DD4S (20-2506)
-
KiaPV5 Cargo VAN (2025)71.2 kWh DD4S (20-2506)
-
KiaPV5 Passenger BUS (2025)51.5 kWh (20-2506)
-
KiaPV5 Passenger BUS (2025)71.2 kWh (20-2506)
- The MAD suspension system is designed to compensate for load variations and to support and assist the vehicle's original suspension system, ensuring safety and comfort even at the maximum authorized load. The suspensions never exceed the vehicle's maximum authorized load.
We recommend having these products installed by a professional
- Increased safety for you and other road users!
- Better road holding at maximum load.
- Improved driving comfort at maximum load.
- The vehicle maintains its original height at maximum (authorized) load.
- The vehicle's original suspension has greater leeway at maximum load.
- All springs are progressive.
- The assembly is done entirely without damaging the bodywork, so the product does not affect the vehicle's warranties.
- Installation time: approximately 1h30
All images are universal for the respective mounting system. The appearance of the springs, bellows, and supports may slightly differ from the images shown, but they will always fit the vehicle for which the kit is designed.
DELIVERY WITHIN 10-15 DAYS
