KIA PV5 2025 TODAY REINFORCED REAR SPRINGS KIT
Reference : ACRF378HV028
KIA PV5
(2025 - TODAY+)
Cargo and passenger
KIA PV5 2025 TODAY REINFORCED REAR SPRINGS KIT:
Complete set of 2 variable load springs (0 to maximum allowable load). Compatible with KIA PV5 electric (from 2025).
Does your KIA PV5 sag at the rear when loaded with tools or accessories? MAD Suspension, a recognized specialist, offers the ideal solution. By replacing your original rear springs with our MAD reinforced load springs, you can load your vehicle without the risk of sagging. The photo shows the vehicle loaded to 500 kg, perfectly illustrating the before/after difference.
The springs are progressive, and their stiffness increases with the load. All MAD products are TÜV approved and tested; they do not affect other vehicle components. This kit is suitable for drivers whose load varies from 0 to the maximum allowable load. At maximum allowable load, the vehicle maintains its original ride height.
These load springs replace the original rear springs of the vehicle. They raise the rear of the car by approximately 40 mm when unloaded. They are particularly suitable for vehicles equipped with additional equipment that increases their KIA PV5 weight.
Compatible with the following car models:
- KIA PV5 electric 2025+
-
KiaPV5 Cargo VAN (2025)51.5 kWh DD4S (20-2506)
-
KiaPV5 Cargo VAN (2025)71.2 kWh DD4S (20-2506)
-
KiaPV5 Passenger BUS (2025)51.5 kWh (20-2506)
-
KiaPV5 Passenger BUS (2025)71.2 kWh (20-2506)
- The MAD suspension system is designed to compensate for load variations and to support and assist the vehicle's original suspension system, ensuring safety and comfort even at the maximum authorized load. The suspensions never exceed the vehicle's maximum authorized load.
We recommend having these products installed by a professional
- Increased safety for you and other road users!
- Better road handling at maximum load.
- Improved driving comfort at maximum load.
- The car maintains its original height at maximum (authorized) load.
- The original suspension of the car has greater leeway at maximum load.
- All springs are progressive.
- The assembly is done entirely without damaging the bodywork, so the product does not affect the vehicle's warranties.
- Installation time: approximately 1.5 hours
All images are universal for the respective mounting system. The appearance of the springs, bellows, and supports may slightly differ from the images shown, but they will always fit the vehicle for which the kit is designed.
DELIVERY WITHIN 10-15 DAYS
