Rear Air Suspension for MERCEDES SPRINTER 4x4 2018 TODAY with Compressor and Specific Control Panel
Reference : ACNR097HV094CS1
MERCEDES SPRINTER 4x4 - HYMER MLT 570 / 580 / DOVA etc
(2018 - TODAY-)
Rear Air Suspension for HYMER 570 / 580 with Compressor and Specific Control Panel :
MAD has developed a special version of its popular air suspension that perfectly adapts to the raised versions of the Mercedes Sprinter 4X4 2018+. This air suspension is designed to eliminate the sagging that all these motorhomes experience when built at the factory. We simply let the pictures speak for themselves!
This air suspension version includes the MAD compressor and a model-specific control panel that attaches to the side of the driver's seat, as shown in the image.
MAD air suspension is in most cases designed to work with the car's original rear suspension. Air suspension comes in different variants and is suitable for car owners who want to be able to adjust the hardness of their suspension themselves. Air suspension is available with manual filling as you need to have access to air to fill the bellows to the desired pressure. It is also available with a compressor and a pressure gauge so you can set the desired pressure yourself, even while driving. There is also a full air suspension that compensates for the car's original suspension and automatically adjusts the load level. By installing air suspension on your car, you get a completely different driving experience, whether you are driving loaded or unloaded. All air suspensions are model-specific to match your particular car model. With air suspension, you can also adjust the height of the rear of your vehicle on specific occasions if you need higher ground clearance. Comfort and safety reach a whole new level with MAD air suspension. All MAD air suspension kits are TUV approved. This pricing does not affect car warranties or vehicle inspection.
Compatible with the following car models :
- Mercedes Sprinter 4-wheel drive incl. 2018+ (for single-wheel cars - chassis cab)
- Perfectly suitable for Hymer MLT 570/580/Dovra etc.
You get the best results if the air bellows are mounted with a compressor. You can then partially adjust the air pressure in your bellows by simply pressing a button inside the car's cabin, but you also avoid the risk of destroying the bellows with too high or too low pressure in them because you are constantly aware of the pressure you have.
Air suspension has the advantage of being able to have different hardness in the right and left bellows, which can be a big advantage if, for example, you have more load on one side of your vehicle. Air suspension also generally supports heavier loads than a steel spring, but it should be emphasized that an air spring does not feel good under constant and heavy load, so in these cases, e.g. a robust steel spring would be preferable.
Why should you choose MAD air suspension?
- Minimum pressure in empty air bellows 0.5 BAR
- Minimum and maximum pressure under load 1.0 - 3.0 BAR
- All MAD products are TUV approved
- Less wear on your tires
- Never affects car warranties
- The best air bellows on the market
- Reduced sensitivity to side winds
- Better quality and fit
- All kits are available with and without compressor
- Hardware warranty 2 years without compressor
- Hardware warranty 3 years with compressor (Electronics 1 year)
SHIPPING TIME WITHIN 1-2 WEEKS
