FORD RANGER 2011 2019 SPRING KIT Reinforced Springs +45 +30 mm front rear
Reference : ACMD064HV251
€869.50
Tax included
FORD RANGER
(2011 - 2019)
FRONT REAR SPRING SET +45 / +30mm for FORD RANGER 2011 2019:
Complete kit including 2 front lift springs and 2 rear auxiliary springs for your Ford Ranger 2011-2019. This lift kit lifts the car by 45 mm at the front and 30 mm at the rear, which increases ground clearance and gives the car a nicer look. The springs are progressive and become harder with higher loads. All MAD products are TUV approved and tested products that do not affect other parts of the car. By increasing the car's ground clearance, you can fit larger tires and rims and give the car better off-road driving.
The lift springs replace the car's original suspension, while the auxiliary springs at the rear work with the car's normal suspension. They raise the car by 45 mm at the front and 30 mm at the rear, the exact lift for each car model appears in the product information. Suitable for those who want to increase the car's ground clearance and get a nicer look as well as better off-road properties.
Compatible with the following car models:
- Ford Ranger 4-wheel drive Double & Super Cab 2012+ Lifts the car by 45 mm at the front, 30 mm at the rear. Not suitable for single cabs or 2-wheel drive
We recommend performing a front wheel alignment after installing this product, otherwise your tires will wear out laterally. Drive the car 2 to 3 km before adjusting the front suspension.
MAD's suspension system is there to compensate for different load weights and to support and assist the car's original spring system so that you maintain safety and comfort even at the maximum allowed load. Suspensions never increase the maximum allowed load weight for the car.
ADVANTAGES:
- Increased safety for you and your fellow road users!
- Better road holding at maximum load.
- Better driving comfort at maximum load.
- The car maintains its original height under maximum (allowed) load.
- The car's original suspension offers more working space at maximum load.
- All springs are progressive.
- The entire assembly is carried out without affecting the bodywork, so the product does not affect the car's warranties
- Assembly time approximately 1H per front side and 1.5H at the rear plus front axle adjustment.
SHIPPING TIME WITHIN 12/15 DAYS
Recently viewed products
