FORD PUMA Door Sills 2019 TO PRESENT BLACK STAINLESS STEEL 4 PIECES
Reference : AC226028
FORD PUMA
(2019 - PRESENT)
BLACK STAINLESS STEEL
BLACK STAINLESS STEEL DOOR SILLS 4 PIECES:
The stainless steel door sills effectively protect the edges of your FORD PUMA against dents and scratches that may occur during entry and exit. Additionally, they give your FORD PUMA a premium appearance. This high-quality accessory is made in Europe.
Installation Instructions:
Install in a dry and dust-free environment.
After removing the product from its packaging, be sure to perform fitting exercises on the area where it will be applied without removing the protective surface of the double-sided adhesive tape.
Thoroughly clean the surface where the product will be adhered with a cleaning liquid (alcohol, rubbing alcohol, cellulose thinner, etc.). (Do not clean with liquids containing additives such as scented cologne, wet wipes, gasoline, etc.) Cleaning the surface is very important for installation. Plastic parts with a greasy and shiny surface, such as glass seals and door protection strips, must be cleaned until this surface is removed.
If the product includes a “Primer” wipe that enhances adhesion (Primer: This is a chemical liquid to be applied to plastic surfaces. It cannot/should not be used on painted surfaces of the vehicle), apply it only to the cleaned surface where the adhesive strips on the back of the product will stick and where the product will cover. (Be careful not to apply it to areas where the product will not stick/cover)
The ambient temperature must be above 25°C for the double-sided adhesive tape on the back of the product to exhibit all its properties. After removing the protective surface of the tape, use a hairdryer, etc. to increase the bonding strength. Apply heat to the tape using
After removing the protective surface of the double-sided adhesive tape on the back of the product and applying heat, immediately apply the product to the cleaned and, if necessary, primed area. Ensure it adheres well by applying pressure with a dry cloth. To ensure proper adhesion, protect it from water for 24 hours and avoid washing your vehicle with high-pressure water for 48 hours.
DELIVERY WITHIN 2 to 6 business days
