Interior Trunk Sill RENAULT CLIO 5 2019 2025 INOX CHROME 2 PIECES
Reference : AC7027023
RENAULT CLIO 5
(2019 - 2025)
INOX CHROME
INTERIOR TRUNK SILL INOX CHROME 2 PIECES:
These stainless steel pieces cover the interior part of the trunk sill to protect it and transform it into a chrome finish, and are fixed with: type 3M double-sided tape, decorative, they will serve for many years. Very simple installation. Delivered with assembly instructions.
Material: INOX CHROME
Delivery contents: 10 PIECES + assembly instructions
Vehicle-specific chrome accessory
Product features:
Chrome products are manufactured with a molding system specifically for the vehicle part they will be applied to.
Chrome products are made from high-quality A 304 stainless steel.
The products are shipped ready to install with high-quality double-sided acrylic tape on the back.
Warranty:
Brilliant chrome stainless steel products; It is covered by a 5-year warranty against rust.
Installation instructions:
Install in a dry and dust-free environment.
After removing the product from its packaging, be sure to perform fitting exercises on the area where it will be applied without removing the protective surface of the double-sided tape.
Carefully clean the surface where the product will be adhered with a cleaning liquid (alcohol, rubbing alcohol, cellulose thinner, etc.). (Do not clean with liquids containing additives such as scented cologne, wet wipes, gasoline, etc.) Cleaning the surface is very important for installation. Plastic parts with a greasy and shiny surface, such as glass seals and door protection strips, must be cleaned until this surface is gone.
If the product contains a “Primer” wipe that enhances adhesion (Primer: It is a chemical liquid to be applied to plastic surfaces. It cannot/should not be used on painted surfaces of the vehicle), apply it only on the cleaned surface where the tape on the back of the product will stick and where the product will cover. (Be careful not to apply it to areas where the product will not stick/cover)
The ambient temperature must be above 25°C for the double-sided tape on the back of the product to show all its properties. After removing the protective surface of the tape, use a hairdryer, etc. to increase the adhesion strength. Apply heat to the tape using
After removing the protective surface of the double-sided tape on the back of the product and applying heat, immediately apply the product to the cleaned and, if necessary, primed area. Ensure it adheres well by applying pressure with a dry cloth. To ensure good adhesion, protect it from water for 24 hours and avoid washing your vehicle with high-pressure water for 48 hours.
SHIPPING TIME 2 TO 15 DAYS
