Door Trim PEUGEOT PARTNER RIFTER 2019 TO PRESENT STAINLESS STEEL 4 PIECES
Reference : 5732131
PEUGEOT PARTNER RIFTER
(2019 - PRESENT)
STAINLESS STEEL CHROME
4 pieces
STAINLESS STEEL DOOR TRIM SET 4 PIECES
DOES NOT REPLACE THE VEHICLE'S ORIGINAL TRIM (clipped onto the door). ONLY SUITABLE FOR MODELS NOT EQUIPPED WITH ORIGINAL DOOR TRIM
The trims are fixed with: type 3M double-sided tape, decorative, they will last for many years. Very simple installation. Delivered with assembly instructions.
The set includes 4 pieces to equip both sides of the vehicle (right side and left side).
Material: high-quality 304 stainless steel, V2A chrome, stainless steel
Delivery contents: 4-part side bar + assembly instructions
Vehicle-specific chrome ABS accessory
Product features:
Chrome products are manufactured with a molding system specifically for the vehicle part they will be applied to.
ABS chrome products are made in chrome on ABS plastic.
The products are shipped ready to install with high-quality double-sided acrylic tape on the back. (Reinforcing silicone application may be applied to wide products).
Warranty:
ABS chrome products; The chrome plating is covered by a one-year warranty.
Installation instructions:
Install in a dry and dust-free environment.
After removing the product from its packaging, practice placing it in the area where it will be applied without removing the protective surface of the double-sided tape.
Thoroughly clean the surface where the product will be adhered with a cleaning liquid (alcohol, rubbing alcohol, cellulose thinner, etc.). (Do not clean with liquids containing additives such as scented cologne, wet wipes, gasoline, etc.) Cleaning the surface is very important for installation. Plastic parts with a greasy and shiny surface, such as glass seals and door protection strips, must be cleaned until this surface is gone.
If the product contains a “Primer” wipe that enhances adhesion (Primer: This is a chemical liquid to be applied to plastic surfaces. It cannot/should not be used on the painted surfaces of the vehicle), apply it only to the cleaned area where the strips on the back of the product will stick and where the product will cover. (Be careful not to apply it to areas where the product will not stick/cover)
The ambient temperature must be above 25°C for the double-sided tape on the back of the product to show all its properties. After removing the protective surface of the tape, use a hairdryer, etc. to increase the adhesive strength. Apply heat to the trim using
After removing the protective surface of the double-sided tape on the back of the product and applying heat, immediately apply the product to the cleaned and, if necessary, primed area. Ensure it adheres well by applying pressure with a dry cloth. To ensure the product adheres well, protect it from water for 24 hours and avoid washing your vehicle with high-pressure water for 48 hours.
SHIPPING TIME 2 TO 15 DAYS
Delivery times
Expédition sous 3 à 15 jours ouvrés selon disponibilités
Customers who bought this product also bought:
Recently viewed products
Black front bumper Fiat Fiorino Qubo from 2007 with fog light holes REF 735520252
- Brand ORIGINAL ERSATZTEIL (GENUINE PART)
- Original reference (OEM) 735790335
