Support
téléphonique - France : (+33).6.66.11.14.81
Espagne :
+34.972.505.421
Reference : ACRF136HV211
CITROEN BERLINGO electric
(2022 - TODAY-)
Lift kit for Citroën e-Berlingo, type E, manufactured from July 2021 (minimum load 200 kg/with black rubber stops)
Maximum support, Cross Country, Standard and Long, Only for original rear color code (2x Green 1x Grey), Minimum rear load 200 kg, Black rubber suspension stop
This MAD suspension lift kit raises the car by 25 mm at the front and 25 mm at the rear, increasing ground clearance and giving it a more elegant look. The springs are progressive and stiffen with higher loads. All MAD products are TÜV approved and tested, with no impact on other car components. By increasing ground clearance, you can fit wider tires and rims and improve the car's off-road performance. This kit is equipped with medium-strength rear springs, which requires driving with a rear load of 200 kg or more.
Lift springs replace the original suspension. They raise the car by 25 mm at the front and 25 mm at the rear. The exact height for each model is indicated in the product sheet. They are suitable for those who wish to increase their car's ground clearance, give it a neater aesthetic, and better off-road performance.
Suitable for the following car models below:
Lift springs are designed for certain car models and primarily serve to increase the vehicle's ground clearance.
On most LCVs, the original suspension is replaced with new springs. On pick-ups, the rear lift is usually combined with an auxiliary spring.
MAD lift kits are adapted to the vehicle's original shock absorbers; no replacement is necessary.
The lift is always adapted to preserve chassis parts. Excessive lifting has a negative effect on the chassis.
Attention! The lift indicated in the catalog is valid for an empty vehicle (unless otherwise specified in the catalog)!
DELIVERY WITHIN 10-15 DAYS
rear spring Fiat Ulysse Type 179 Lancia Phedra Type 179 Citroen C8 Peugeot 807 REF 1493742080
check_circle
check_circle
