TOYOTA C HR Door Trim 2016 2023 STAINLESS STEEL 4 PIECES
Reference : ACTOY7028131
TOYOTA CH R
(2016 - 2023)
STAINLESS STEEL CHROME
4 pieces
These stainless steel door trims (chrome finish) are designed to stick directly onto the original lower door trims of the vehicle.
STAINLESS STEEL DOOR TRIM SET 4 PIECES
DOES NOT REPLACE THE VEHICLE'S ORIGINAL TRIMS (clipped onto the door). ONLY SUITABLE FOR MODELS NOT EQUIPPED WITH ORIGINAL DOOR TRIMS
The trims are attached using: type 3M double-sided tape, decorative, they will last for many years. Very simple installation. Comes with assembly instructions.
The set includes 4 pieces to equip both sides of the vehicle (right side and left side).
Material: high-quality 304 stainless steel, V2A chrome, stainless steel
Delivery contents: 4-part side bar + assembly instructions
Vehicle-specific chrome accessory
Product features:
Chrome products are manufactured with a molding system specifically for the vehicle part they will be applied to.
Chrome products are made from high-quality class A 304 stainless steel.
The products are shipped ready to install with high-quality double-sided acrylic tape on the back.
Warranty:
Bright chrome stainless steel products; It is covered by a 5-year warranty against rust.
Installation instructions:
Install in a dry and dust-free environment.
After removing the product from its packaging, be sure to perform fitting exercises on the area where it will be applied without removing the protective surface of the double-sided tape.
Carefully clean the surface where the product will be adhered with a cleaning liquid (alcohol, rubbing alcohol, cellulose thinner, etc.). (Do not clean with liquids containing additives such as scented cologne, wet wipes, gasoline, etc.) Cleaning the surface is very important for installation. Plastic parts with a greasy and shiny surface, such as glass seals and door protection strips, must be cleaned until this surface is gone.
If the product contains a “Primer” wipe that enhances adhesion (Primer: This is a chemical liquid to be applied to plastic surfaces. It cannot/should not be used on painted surfaces of the vehicle), apply it only to the cleaned surface where the back strips of the product will stick and where the product will cover. (Be careful not to apply it to areas where the product will not stick/cover)
The ambient temperature must be above 25°C for the double-sided tape on the back of the product to show all its properties. After removing the protective surface of the tape, use a hairdryer, etc. to increase the adhesive strength. Apply heat to the trim using
After removing the protective surface of the double-sided tape on the back of the product and applying heat, immediately apply the product to the cleaned and, if necessary, primed area. Ensure it adheres well by applying pressure with a dry cloth. To ensure the product adheres well, protect it from water for 24 hours and avoid washing your vehicle with high-pressure water for 48 hours.
SHIPPING TIME 2 TO 15 DAYS
