TRUNK SILL MERCEDES VITO 2014 TO PRESENT MATTE BLACK STAINLESS STEEL
Reference : AC240204
MERCEDES VITO / CLASS V (W 447)
(2014 - PRESENT)
MATTE BLACK STAINLESS STEEL
STAINLESS STEEL TRUNK SILL PROTECTION WITH EDGE (exterior):
this trunk sill protection with edge effectively protects against dents and scratches during loading and unloading. Thanks to its shape, like the ribbed pattern on top, it is designed to fit perfectly with the design of the MERCEDES VITO. And if you ever wish to replace the protector after heavy use, that is also possible. It will be much cheaper than repainting your bumper.
This trunk sill is made of high-quality V2A stainless steel and comes with a complete mounting kit and clear installation instructions. Installation is very easy, as the product is equipped with double-sided adhesive tape.
Install in a dry and dust-free environment.
After removing the product from its packaging, be sure to perform fitting exercises on the area where it will be applied without removing the protective surface of the double-sided adhesive tape.
Carefully clean the surface where the product will be adhered with a cleaning liquid (alcohol, rubbing alcohol, cellulose thinner, etc.). (Do not clean with liquids containing additives such as scented cologne, wet wipes, gasoline, etc.) Cleaning the surface is very important for installation. Plastic parts with a greasy and shiny surface, such as glass seals and door protection strips, must be cleaned until this surface is gone.
If the product contains a “Primer” wipe that enhances adhesion (Primer: This is a chemical liquid to be applied on plastic surfaces. It cannot/should not be used on painted surfaces of the vehicle), apply it only on the cleaned surface where the adhesive strips on the back of the product will stick and where the product will cover. (Be careful not to apply it on areas where the product will not stick/cover)
The ambient temperature must be above 25°C for the double-sided adhesive tape on the back of the product to show all its properties. After removing the protective surface of the tape, use a hairdryer, etc. to increase the adhesive strength. Apply heat to the tape using
After removing the protective surface of the double-sided adhesive tape on the back of the product and applying heat, immediately apply the product to the cleaned and, if necessary, primed area. Ensure it adheres well by applying pressure with a dry cloth. To ensure good adhesion, protect it from water for 24 hours and avoid washing your vehicle with high-pressure water for 48 hours.
DELIVERY WITHIN 2 TO 6 BUSINESS DAYS
